单磨粒划擦蓝宝石表面残余应力仿真Simulation of Residual Stress on Sapphire Surface Induced by Single Abrasive Grain Scratching
刘忠祥
建模与仿真 Vol.14 No.2, February 28 2025, PDF, , XML DOI:10.12677/mos.2025.142162 被引量
基于盲孔法的焊接空心球节点网架中无缝钢管表面残余应力的测试研究Test and Research on Residual Stress of Rolled Tube and Hollow Ball of Cross Plate Welded Hollow Spherical Joints in Grid Structure Based on Blind Hole Method
韩敬鉴, 雷宏刚, 路国运, 李 洋 国家自然科学基金支持
土木工程 Vol.9 No.5, May 7 2020, PDF, HTML, XML DOI:10.12677/HJCE.2020.95040 被引量
基于热力耦合下细长轴车削误差研究Research on Turning Error of Slendering Shaft Based on Thermodynamic Coupling
张信卿
机械工程与技术 Vol.10 No.4, August 27 2021, PDF, HTML, XML DOI:10.12677/MET.2021.104050 被引量
基于有限元仿真的手机支架结构参数优化Structural Parameter Optimization of Mobile Phone Stand Based on Finite Element Simulation
姚委宏
建模与仿真 Vol.14 No.1, January 23 2025, PDF, , XML DOI:10.12677/mos.2025.141084 被引量
不锈钢材料变形机理及切削参数优化研究Research on Deformation Mechanism and Optimization of Cutting Parameters of Stainless Steel Materials
李永杰, 杨 帆, 王 丽, 郝伟伟, 朱 亮, 黄家旺
机械工程与技术 Vol.14 No.3, June 24 2025, PDF, , XML DOI:10.12677/met.2025.143032 被引量
超声车削Monel K500高温合金残余应力模拟分析Simulation Analysis of Residual Stress of Monel K500 Superalloy by Ultrasonic Turning
韩学杰, 许闻卓, 吕青青, 杨立权, 丁贺阳 科研立项经费支持
机械工程与技术 Vol.14 No.1, February 8 2025, PDF, , XML DOI:10.12677/met.2025.141001 被引量
铣削残余应力对Al7075-T6合金应力腐蚀的影响Effect of Milling Residual Stress on Stress Corrosion of Al7075-T6 Alloy
魏雨希, 江小辉, 蔡 岩 科研立项经费支持
建模与仿真 Vol.12 No.3, May 15 2023, PDF, HTML, XML DOI:10.12677/MOS.2023.123196 被引量
应力测量方法Methods for Stress Measurement
姜国利, 王江涌
材料科学 Vol.6 No.1, January 19 2016, PDF, HTML, XML DOI:10.12677/MS.2016.61002 被引量
地铁转向架侧梁焊接残余应力的研究Study on the Welding Residual Stress of the Side Beam of the Subway Bogie
张迪, 徐涛, 董洪达
机械工程与技术 Vol.7 No.2, April 16 2018, PDF, HTML, XML DOI:10.12677/MET.2018.72011 被引量
齿面喷丸强化后表面微观形貌仿真分析Simulation Analysis on Micro-Morphology of Tooth Surface after Shot Peening
余墨涵, 李新友, 李关辉
建模与仿真 Vol.8 No.2, May 28 2019, PDF, HTML, XML DOI:10.12677/MOS.2019.82008 被引量